The new MELAseal 100+ combines the advantages of its predecessors, the MELAseal 100 and the MELAseal 101 in a single device. Efficiency, reliability and ease of use.

After a brief preheating time of about 2 minutes, the foils can be sealed without a pause and with a width of sealing seam of 10 mm (EN 868-5 requires a minimum width of only 6 mm).

The new electronics tests the sealing time and the sealing temperature, while an optical and acoustic signal is made if there is a deviation. The infinitely variable thermostat enables the use of packages from different manufacturers.

During the sealing procedure, bags can be cut from a roll (e.g. MELAfolMELAfol) to the required length with the integrated cutting device, and be processed so much more cheaply than with ready foil bags.