For the daily cleaning, disinfection and deodorising of all Dental system units an amalgam separators

Our plus:

° suitable for all amalgam seperators (eg Dürr, Metasys)

° can be used in all treatment units (eg Sironna, KaVo, Castellini, etc.)

° does not foam

° fresh smell

° tested and approved by Sirona

° economical use



The coordinated products aspirmatic® (cleaning disinfection) and aspirmatic® cleaner (special cleaner) ensure extensive cleaning and the necessary hygienic safety during practice operation. Due to the simple handling of the aspirmatic® system (dosing tank), the application of these products becomes a comfortable routine.



Use once or twice daily. For best results use the aspirmatic® dosing system twice daily at the end of each clinical session. To make up use solution add 40 ml aspirmatic® to 1960 ml cold water. To ensure the solution does not foam when diluting always measure the correct amount of luke warm water first, then pour the correct amount of aspirmatic® in to the water.

Suck 1 1/2 litres of use solution through the suction hoses and pour the remaining 1/2 litre in the rinse basin. Leave to soak for minimum of 30 minutes, or overnight. After soaking always rinse through with at least one litre of clean water before using the suction system. Dilute the product with cold water to get the required application concentration.



Composition:

100 g aspirmatic® contain: 7,5 g dioctyl dimethyl ammonium chloride.

Labelling according to Regulation (EC) No 648/2004: < 5 % non-ionic surfactants, < 5 % soap, perfumes.



Chemical-physical data

Form: liquid

Color: blue

Flash point: Not applicable

Density: ca. 0,99 g/cm3/20°C

Viscosity, dynamic: No data available

pH: 6,5 - 7,5/20°C/concentrate